looking for power steering control valve At the threaded end, mine is 1 inch I think part # is 6643
64 Comet
power steering control valve
-
- Posts: 55
- Joined: Thu Jan 01, 2009 8:52 am
- Location: Imperial, Mo.
-
- Posts: 1870
- Joined: Wed Mar 12, 2014 10:37 pm
- Location: Santa Clara, Ca
Re: power steering control valve
Looking for the entire valve or just a part?
Ron
Ron
-
- Posts: 55
- Joined: Thu Jan 01, 2009 8:52 am
- Location: Imperial, Mo.
Re: power steering control valve
I can rebuild what I have but will need the end that the ball goes into. That piece is pretty bent out of shape when existing ball came out.
-
- Posts: 1870
- Joined: Wed Mar 12, 2014 10:37 pm
- Location: Santa Clara, Ca
Re: power steering control valve
I assume it's the copper/brass cylinder inside the control valve that you are looking for. Didn't find that item by itself yet but I'm sure someone has it. Have seen it listed by itself before.
Here is a kit that has that part and most of the other parts to rebuild the control valve.
http://www.stangerssite.com/CVparts.html
NPD lists some of the parts but not that part.
Ron
Here is a kit that has that part and most of the other parts to rebuild the control valve.
http://www.stangerssite.com/CVparts.html
NPD lists some of the parts but not that part.
Ron
-
- Posts: 55
- Joined: Thu Jan 01, 2009 8:52 am
- Location: Imperial, Mo.