I need 10 clips for the dash trim piece for a '63 comet. Or a link to where to buy. I tired Dearborn & clips for a '64 comet and they are 1/16" too big.
The square base of the clip is 1/2" wide by 5/16" tall. See attached picture. The only ones I can find online are 3/8" tall (1/16" too big). I tried bending them smaller, but didn't work.
WANTED 1963 Comet dash trim clips needed
- careylorang
- Posts: 2
- Joined: Mon Sep 25, 2017 2:55 pm
- Location: Seattle, WA
WANTED 1963 Comet dash trim clips needed
- Attachments
-
- B-04426A1.jpg (22.43 KiB) Viewed 1311 times
Re: WANTED 1963 Comet dash trim clips needed
Part Numbers are
padded dash- C0DB-6404561-C
non padded- C1KB-6204561-A
Numbers do not break though.
Bruce
padded dash- C0DB-6404561-C
non padded- C1KB-6204561-A
Numbers do not break though.
Bruce
-
- Posts: 1870
- Joined: Wed Mar 12, 2014 10:37 pm
- Location: Santa Clara, Ca
Re: WANTED 1963 Comet dash trim clips needed
Some that may work, should be narrower but might be too narrow.
https://www.npdlink.com/store/products/ ... 374-0.html
Another possible.
http://www.falconparts.com/ford-falcon- ... 2p7191.htm
http://www.parts123.com/parts123/yb.dll ... Z50001018a
Ron
https://www.npdlink.com/store/products/ ... 374-0.html
Another possible.
http://www.falconparts.com/ford-falcon- ... 2p7191.htm
http://www.parts123.com/parts123/yb.dll ... Z50001018a
Ron
- careylorang
- Posts: 2
- Joined: Mon Sep 25, 2017 2:55 pm
- Location: Seattle, WA
Re: WANTED 1963 Comet dash trim clips needed
Thanks all!
I ordered some from Melvin's Classic Ford. Cross my fingers they work!!
-Carey
I ordered some from Melvin's Classic Ford. Cross my fingers they work!!
-Carey