Bad modification to a 64 Part B

Discussions about general body work and modifications
Post Reply
tiomev
Posts: 4
Joined: Thu Sep 21, 2017 6:57 pm

Bad modification to a 64 Part B

Post by tiomev »

All,

First let me thank everyone who responded with
their knowledge and experience to my first post on this topic.

For newcomers the issue is that a previous owner
removed the structural arch in the transmission tunnel
and my concerns about structural integrity.

Concerns relieved I purchased a C4 transmission adapter which bolts
to the remaining box beam. Unfortunately, the previous owner
removed much of the arch’s box beam leaving only the horizontals
on either side of the tunnel. The transmission adapter is
short by about 2-3 inches on each side. Thus I plan to modify the
adapter.

Here’s my question: Does the adapter have a vertical or a horizontal
offset? Or is the adapter centered horizontally in the arch and flush
with the bottom of the remaining horizontal box beam?

Thanks

Mark V

Post Reply