Restoring 1966 Comet
Restoring 1966 Comet
New member here, but not new restoring muscle cars, Building a 1966 Comet Hardtop, car was drag car it entire life, No rust ever,,,,, Building FE motor 390 2 main block w/ Edelbrock Alum. Heads. 9 1/2-1 Compression, What works good for headers on these motors, Going to use Performer Alum. Intake. Think it should handle a 750 cfm carb,,,Holley?,,, Also building C-6 w/ 2400 stall and 411 gears. Always wanting to learn what works best from experience then from trial and error.
-
- Posts: 5933
- Joined: Mon Feb 20, 2006 12:57 am
- Location: Camarillo,California
Re: Restoring 1966 Comet
trojan;head over to FORDFE.com,there are some expert FE builders on there!!! ROY.
Real Racecars have 3 pedals
Re: Restoring 1966 Comet
I Have a 390 FE in my '66 Cyclone bored .030 over comp cam, flat top Pistons, 11:1 compression, extensive head work, headers by Mad Dog, edge brook performer intake and 750 cfm carb. Plus electronic ignition. The 390 handles the 750 great. Yours should do fine with the mods you made.
-
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: Restoring 1966 Comet
I am very happy with my FPA's. I have a video about it on our youtube channel;
http://youtu.be/Iu4hz0HkgE4
And Roy is right about the wealth of knowledge at Ford FE.
Stacey
http://youtu.be/Iu4hz0HkgE4
And Roy is right about the wealth of knowledge at Ford FE.
Stacey
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
-
- Posts: 1870
- Joined: Wed Mar 12, 2014 10:37 pm
- Location: Santa Clara, Ca
Re: Restoring 1966 Comet
Nice video! sounds real good. Must be fun!
R n
R n