Page 1 of 1
62 Custom Steering Column Flange
Posted: Sat Dec 29, 2018 7:34 pm
by birdman31
I am looking for the steering column tube flange for my '62 Comet Custom (2.8L 170 cu. in). The '63-'65 are all different than the '62. Not sure about the '61 or '60. The flange is the area that the blinker switch is connected to. I have tried (Several times) with what I would think are all the websites... have a few junkyards am checking on. Ebay.. Nada... etc.. etc.. Any ideas..
Re: 62 Custom Steering Column Flange
Posted: Mon Dec 31, 2018 11:08 am
by bmmaurer
Need picture of what your describing to get a part number for ya
CometBruce
Re: 62 Custom Steering Column Flange
Posted: Mon Dec 31, 2018 1:40 pm
by 62Cometman
Are we talking about the shift collar or the last little bit of column just under the steering wheel?
Re: 62 Custom Steering Column Flange
Posted: Wed Jan 02, 2019 7:28 pm
by birdman31
Havent been able to load a pic yet... the part number is: C1DB-3511-A
There are plenty of shift collars out there... it is the piece just under the wheel where also the turn signal lever enters.
Re: 62 Custom Steering Column Flange
Posted: Wed Jan 02, 2019 8:08 pm
by lavron
There is a 60 or 61 Comet and several early Falcons in a local JY I can check for you if you don't find anything, I think I know the part you are looking for, just let me know.
See Ya,
Mike
Re: 62 Custom Steering Column Flange
Posted: Wed Jan 02, 2019 8:22 pm
by birdman31
THANKS MIKE..... I too have calls waiting from a junkyard... but if needed... will get back to you!!!
Re: 62 Custom Steering Column Flange
Posted: Wed Jan 02, 2019 8:24 pm
by birdman31
NEW TO THIS COOOOOOOL SITE.... pics of my comet... (and that part) are too large of a file to download.. so am working on that...
Re: 62 Custom Steering Column Flange
Posted: Wed Jan 02, 2019 9:54 pm
by lavron
You can sign up for an account at
http://cometcentral.com/photos upload there and direct link pictures here.
See Ya,
Mike
Re: 62 Custom Steering Column Flange
Posted: Thu Jan 03, 2019 9:52 am
by bmmaurer
You need one of these. First is for the Std Trans, Second is for Auto.
Call them and have them take a picture to show you before you buy.
C1DD-3511-AP
https://www.rearcounter.com/C1DD-3511-A ... 44605.html
C1DD-3511-BP
https://www.rearcounter.com/C1DD-3511-B ... 44606.html
CometBruce
Re: 62 Custom Steering Column Flange
Posted: Fri Jan 04, 2019 3:47 pm
by birdman31
Still working on downsizing the size of my Comet Pics to upload here... 62 Comet manual transmission, 170 cu. in. 2.8L
Re: 62 Custom Steering Column Flange
Posted: Fri Jan 04, 2019 6:10 pm
by Lip Ripper
I've got the collar for the 3 on the tree.
Re: 62 Custom Steering Column Flange
Posted: Mon Jan 14, 2019 4:42 pm
by birdman31
1962 Mercury Comet 2.8L 170 cu.in. 2dr manual transmission
Re: 62 Custom Steering Column Flange
Posted: Mon Jan 14, 2019 5:48 pm
by lavron
Looks like a nice one.
See Ya,
Mike
Re: 62 Custom Steering Column Flange
Posted: Mon Jan 14, 2019 5:59 pm
by popscomet
boy o boy...that is sharp POP