Lavron's '64 Build Thread
Re: Lavron's '64 Build Thread
Awesome looking wheels. I'm looking at the same ones with 4.5" back space.
Re: Lavron's '64 Build Thread
I am not sure on the 16" is a 7' wheel with 4" of BS I thinktomb22 wrote:Awesome looking wheels. I'm looking at the same ones with 4.5" back space.
Sometimes maybe too much stuff as I plow through this slowly Thanks.gearhasher wrote:This is a GREAT build thread! Thank you for all the great photos and explanations!
See Ya,
Mike
Re: Lavron's '64 Build Thread
Right-on Mike!!! TT’s + Comet = BadA**!!!! For some reason, nice wheels & tires are almost always motivational as well!!
Re: Lavron's '64 Build Thread
Just got this email, not going to hold my breath
Mike
See Ya,We would like to inform you that the manufacturing facility provided an updated shipping date for the following product(s):
ITEM # 151626621 - Silv-O-Lite® 3332H.020 - Hyper Piston Set, 3.681" Bore, 1.530" Compression Height, 0.020" Oversizes
New Estimated Shipping Date (ESD): 12/05/2017
Mike
-
- Posts: 151
- Joined: Tue Oct 17, 2017 1:13 pm
- Location: San Diego, CA
Re: Lavron's '64 Build Thread
Lame! Sucks being at the mercy of vendors!
Chop everything, nothing is sacred.
Destroying the essence of motorcycles, one part at a time. <——— Cars now too I guess.
Destroying the essence of motorcycles, one part at a time. <——— Cars now too I guess.
Re: Lavron's '64 Build Thread
Does this make my rear look more sexy?
I put my wheels on so I could see what width I ended up with, doing a rough measure it looks like the new is around 65 1/2",and an even rougher measure is the current on is about 61" so 4 1/2" wider.
I measured from the front of the current tires out the outer wheel lip at the top and get about 4 1/2" to 4 1/4", take away around 1" each side for the lip that would 6 3/4" to play with.
I think everything will fit ok and I can roll the lip if needed.
See Ya,
Mike
I put my wheels on so I could see what width I ended up with, doing a rough measure it looks like the new is around 65 1/2",and an even rougher measure is the current on is about 61" so 4 1/2" wider.
I measured from the front of the current tires out the outer wheel lip at the top and get about 4 1/2" to 4 1/4", take away around 1" each side for the lip that would 6 3/4" to play with.
I think everything will fit ok and I can roll the lip if needed.
See Ya,
Mike
Re: Lavron's '64 Build Thread
LOOKS GREAT !!....like OL POP has always said.....it's those whls that make it....everytime !! POP
pop/glenda
Re: Lavron's '64 Build Thread
Ordered my pistons 3 months ago, they notified me they have shipped today
They better be right.
See Ya,
Mike
They better be right.
See Ya,
Mike
Re: Lavron's '64 Build Thread
I got a 6-pack today from Silv-O-Lite.
See Ya,
Mike
See Ya,
Mike
Re: Lavron's '64 Build Thread
And I got a 24-pack from Anheuser-Busch! Good deal Mike...hope they’re the right stuff & GtG!!
Re: Lavron's '64 Build Thread
I'm expecting Pop or Joe to be along directly to trump your 24 with a 30 pak.Rocket989 wrote:And I got a 24-pack from Anheuser-Busch! Good deal Mike...hope they’re the right stuff & GtG!!
Re: Lavron's '64 Build Thread
WELL,shoot fire....consider it TRUMPED,,,,OL POP has a 30 pak in the cooler in the shop as we talk... poppoboyjo65 wrote:I'm expecting Pop or Joe to be along directly to trump your 24 with a 30 pak.Rocket989 wrote:And I got a 24-pack from Anheuser-Busch! Good deal Mike...hope they’re the right stuff & GtG!!
pop/glenda
- Jims65cyclone
- Posts: 2769
- Joined: Sun Nov 23, 2014 10:29 pm
- Location: Lexington, SC
Re: Lavron's '64 Build Thread
Hope your attention to detail isn't proportional to the number of cans left in the pak as the day wears on.
Jim
Jim
Re: Lavron's '64 Build Thread
Dang it, I MEANT 30...
And yeah, fine motor skills are the first to go...!
And yeah, fine motor skills are the first to go...!