Fred...would one of those paint can lid openers like you get with a gallon of paint from Lowes or HD work? The one's with the bottle opener on one end and a 90* bend on the other?SASSY wrote:from the inside work my way around the seal with a cheap flat screwdriver that has the end bent over 90 or so degrees.
So the bottom front trim has to go in with the window, too? That explains why mine doesn't have the bottom windshield trim installed, either. The top and side trim are installed, but not the bottom. Apparently they ignored the sealant, too, because I have a drip from the top of the windshield when raining/washing.SASSY wrote:The front I do similar, lower piece of trim and glass in seal, lay lower edge into groove and work seal in with screwdriver.
USE SEALENT IN RUBBER GROVES AND SCREW HOLES!
I didn't now I get soaked in the rain so it has to come apart again!!!!
Jim