I recently purchased a carb rebuild kit, but the previous owner had lashed the choke rod to shaft at some point with some wire!
It looks like there was some kind of plastic clip to attach the rod to the shaft, my question is; Is this clip still available and from where? I have had a look around the net but have not come up anything
Any help always appreciated
Cheers Al
Autolite 4100 question
- The Transplanter
- Posts: 124
- Joined: Sun Jul 24, 2016 11:53 am
- Location: Surrey England
Re: Autolite 4100 question
1964 Comet Caliente Convertible
30,000 miles on our rebuild
All Comets start out as dreams...
Re: Autolite 4100 question
I don't much about these carbs but I found this, says for 2100 but you might see if that is the part you need.
http://www.championcarburetor.com/6365- ... 10900.html
See Ya,
Mike
http://www.championcarburetor.com/6365- ... 10900.html
See Ya,
Mike
Re: Autolite 4100 question
I just looked at Groover's link and it looks like they have the part in brass and cheaper than the place I posted
See Ya,
Mike
See Ya,
Mike
Re: Autolite 4100 question
My 4100 has one like this.lavron wrote:I just looked at Groover's link and it looks like they have the part in brass and cheaper than the place I posted
See Ya,
Mike
- The Transplanter
- Posts: 124
- Joined: Sun Jul 24, 2016 11:53 am
- Location: Surrey England
Re: Autolite 4100 question
Thanks guys that's great, looks like the brass one is the way to go
Its easy when you know what the part is called
Its easy when you know what the part is called
Re: Autolite 4100 question
These guys carry 2100/4100 parts as well. I’ve purchased from them in the past http://www.allcarbs.com
Joe
Joe
Re: Autolite 4100 question
Mikes Carburetors online.