Autolite 4100 question

The Era of The Square Body Racing Comets
Post Reply
User avatar
The Transplanter
Posts: 124
Joined: Sun Jul 24, 2016 11:53 am
Location: Surrey England

Autolite 4100 question

Post by The Transplanter »

I recently purchased a carb rebuild kit, but the previous owner had lashed the choke rod to shaft at some point with some wire!

It looks like there was some kind of plastic clip to attach the rod to the shaft, my question is; Is this clip still available and from where? I have had a look around the net but have not come up anything :cry:

Any help always appreciated 8)

Cheers Al
carb1.jpg
carb1.jpg (128.53 KiB) Viewed 2040 times
Image

User avatar
Groover
Posts: 1795
Joined: Wed Jun 02, 2010 11:36 pm
Location: Indianapolis, IN

Re: Autolite 4100 question

Post by Groover »

Image
1964 Comet Caliente Convertible
30,000 miles on our rebuild

All Comets start out as dreams...

lavron
Site Admin
Posts: 4710
Joined: Sat Nov 01, 2003 9:17 am
Location: Missouri, Ozarks
Contact:

Re: Autolite 4100 question

Post by lavron »

I don't much about these carbs but I found this, says for 2100 but you might see if that is the part you need.

http://www.championcarburetor.com/6365- ... 10900.html

See Ya,
Mike
Mike's build thread
viewtopic.php?f=9&t=13058
Image

lavron
Site Admin
Posts: 4710
Joined: Sat Nov 01, 2003 9:17 am
Location: Missouri, Ozarks
Contact:

Re: Autolite 4100 question

Post by lavron »

I just looked at Groover's link and it looks like they have the part in brass and cheaper than the place I posted :roll:

Image

See Ya,
Mike
Mike's build thread
viewtopic.php?f=9&t=13058
Image

User avatar
poboyjo65
Moderator
Posts: 7037
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: Autolite 4100 question

Post by poboyjo65 »

lavron wrote:I just looked at Groover's link and it looks like they have the part in brass and cheaper than the place I posted :roll:

Image

See Ya,
Mike
My 4100 has one like this.
Image
Johno

User avatar
The Transplanter
Posts: 124
Joined: Sun Jul 24, 2016 11:53 am
Location: Surrey England

Re: Autolite 4100 question

Post by The Transplanter »

Thanks guys that's great, looks like the brass one is the way to go :)

Its easy when you know what the part is called :lol:
Image

comethead
Posts: 5692
Joined: Sun Nov 09, 2003 7:44 pm
Location: Palmdale, CA

Re: Autolite 4100 question

Post by comethead »

These guys carry 2100/4100 parts as well. I’ve purchased from them in the past http://www.allcarbs.com

Joe
1965 Caliente HT- 289/4 speed
1964 Falcon HT- track car- 302/4 speed
Image

billybob
Posts: 29
Joined: Mon Jan 01, 2018 6:23 pm

Re: Autolite 4100 question

Post by billybob »

Mikes Carburetors online.

Post Reply