TOP LOADER SHIFTER MECHANISM
TOP LOADER SHIFTER MECHANISM
I need some help with identifying a top loader shifter. I cannot find a FORD number on it anywhere. It came with a tranny that I bought at a swap meet and rebuilt. The tranny is a RUG that identifies itself as originating in a 68 MUSTANG behind a 390 big block.The shifter mechanism, i.e. the "Brains" was not on the tranny when I bought it. After rebuilding both it became apparent that This shifter is NOT compatible with the mounting local on my tail shaft housing. The Tranny is destined for my 65 CYCLONE. During the rebuild I made the necessary changes to the input shaft, tail housing etc. If anyone could help me I D the thing I would be very grateful. Also, if anyone would be interested in swapping a compatible 289 65 COMET/FALCON mechanism for this one I would be very interested. I am trying to attach photos but I am having a heck of a time. I will send the photos as soon as I crack the code on how to do it! Thanks to All, TOM
Re: TOP LOADER SHIFTER MECHANISM
Hey Tom I don’t believe Ford stamped any of the shifter bodies.
Here’s some info on identification http://www.kevinstang.com/fordshift.htm
Bill Healey rebuilds original shifters. He may have a Comet shifter. His number is 301-774-3710
Joe
Here’s some info on identification http://www.kevinstang.com/fordshift.htm
Bill Healey rebuilds original shifters. He may have a Comet shifter. His number is 301-774-3710
Joe
Last edited by comethead on Wed Mar 21, 2018 7:58 pm, edited 1 time in total.
Re: TOP LOADER SHIFTER MECHANISM
Hi Joe, Thanks for all of the great information. I do appreciate your help. As I said in my post I don't know how to add pictures yet. Would I be imposing on you to give me a few pointers? Interestingly, I dealt with Bill Healy years ago when I was just starting my CYCLONE project and did buy my shifter mechanism from him. Also, I have dealt with David Kee and Dan Williams, as I am sure you have, and spoke with both on the phone. It has been 10 years since I finished the CYCLONE so I have forgotten much of what I learned. You have been a wealth of information and insight and I do appreciate all you have done for me. If you could give me a few pointers on attaching photos I will get them up ASAP. I am also going to contact Mr. Healy.
As Always; THANK YOU and kind regards,TOM
As Always; THANK YOU and kind regards,TOM
Re: TOP LOADER SHIFTER MECHANISM
Hey Tom I use http://postimages.org.
You need to upload your pictures to that website and then you will copy and paste the links they provide in your thread so we can view your pictures.
If you can’t get it, email them to me and I’ll post for you jmd68fb@yahoo.com
Joe
You need to upload your pictures to that website and then you will copy and paste the links they provide in your thread so we can view your pictures.
If you can’t get it, email them to me and I’ll post for you jmd68fb@yahoo.com
Joe
Re: TOP LOADER SHIFTER MECHANISM
Last edited by comethead on Fri Mar 23, 2018 4:21 pm, edited 1 time in total.
Re: TOP LOADER SHIFTER MECHANISM
Tom here is an original Comet/Falcon Toploader shifter https://rover.ebay.com/rover/0/0/0?mpre ... 3361864151
Last edited by comethead on Fri Mar 23, 2018 4:22 pm, edited 1 time in total.
Re: TOP LOADER SHIFTER MECHANISM
Tom,nice job on the shifter body!! Hopefully,you have the rods and levers. Even if it doesn't fit your tranny,it looks like it's worth good moneythos25 wrote:Hi Joe, Thanks for all of the great information. I do appreciate your help. As I said in my post I don't know how to add pictures yet. Would I be imposing on you to give me a few pointers? Interestingly, I dealt with Bill Healy years ago when I was just starting my CYCLONE project and did buy my shifter mechanism from him. Also, I have dealt with David Kee and Dan Williams, as I am sure you have, and spoke with both on the phone. It has been 10 years since I finished the CYCLONE so I have forgotten much of what I learned. You have been a wealth of information and insight and I do appreciate all you have done for me. If you could give me a few pointers on attaching photos I will get them up ASAP. I am also going to contact Mr. Healy.
As Always; THANK YOU and kind regards,TOM
Re: TOP LOADER SHIFTER MECHANISM
Hi Again Joe, I do have the correct rods and levers for this shifter and am still hoping that I could find someone who would be interested in a trade. If I could ID the thing I could list it on e- bay or Craigs list. AS to your tip about Bill Healy,I may have told you this but I bought a COMET shifter from him 20 some years ago. He lived at that time in Onley, Maryland so I will call him this week. He is a very nice gentleman and was very helpful. AS always nice chatting with you . Kind Regards, TOM