62 Custom Steering Column Flange
62 Custom Steering Column Flange
I am looking for the steering column tube flange for my '62 Comet Custom (2.8L 170 cu. in). The '63-'65 are all different than the '62. Not sure about the '61 or '60. The flange is the area that the blinker switch is connected to. I have tried (Several times) with what I would think are all the websites... have a few junkyards am checking on. Ebay.. Nada... etc.. etc.. Any ideas..
Re: 62 Custom Steering Column Flange
Need picture of what your describing to get a part number for ya
CometBruce
CometBruce
-
- Posts: 80
- Joined: Tue Oct 03, 2017 4:47 pm
Re: 62 Custom Steering Column Flange
Are we talking about the shift collar or the last little bit of column just under the steering wheel?
62 Comet 170, dagneham trans, 2.8 7.25 rear 260 T5 8 inch swap planned for the future.
Re: 62 Custom Steering Column Flange
Havent been able to load a pic yet... the part number is: C1DB-3511-A
There are plenty of shift collars out there... it is the piece just under the wheel where also the turn signal lever enters.
There are plenty of shift collars out there... it is the piece just under the wheel where also the turn signal lever enters.
Re: 62 Custom Steering Column Flange
There is a 60 or 61 Comet and several early Falcons in a local JY I can check for you if you don't find anything, I think I know the part you are looking for, just let me know.
See Ya,
Mike
See Ya,
Mike
Re: 62 Custom Steering Column Flange
THANKS MIKE..... I too have calls waiting from a junkyard... but if needed... will get back to you!!!
Re: 62 Custom Steering Column Flange
NEW TO THIS COOOOOOOL SITE.... pics of my comet... (and that part) are too large of a file to download.. so am working on that...
Re: 62 Custom Steering Column Flange
You can sign up for an account at http://cometcentral.com/photos upload there and direct link pictures here.
See Ya,
Mike
See Ya,
Mike
Re: 62 Custom Steering Column Flange
You need one of these. First is for the Std Trans, Second is for Auto.
Call them and have them take a picture to show you before you buy.
C1DD-3511-AP
https://www.rearcounter.com/C1DD-3511-A ... 44605.html
C1DD-3511-BP
https://www.rearcounter.com/C1DD-3511-B ... 44606.html
CometBruce
Call them and have them take a picture to show you before you buy.
C1DD-3511-AP
https://www.rearcounter.com/C1DD-3511-A ... 44605.html
C1DD-3511-BP
https://www.rearcounter.com/C1DD-3511-B ... 44606.html
CometBruce
Re: 62 Custom Steering Column Flange
Still working on downsizing the size of my Comet Pics to upload here... 62 Comet manual transmission, 170 cu. in. 2.8L
Last edited by birdman31 on Mon Jan 14, 2019 4:40 pm, edited 1 time in total.
-
- Posts: 1870
- Joined: Wed Jun 06, 2012 6:47 am
- Location: Lake Placid, Florida
Re: 62 Custom Steering Column Flange
I've got the collar for the 3 on the tree.
66 Cyclone GT; 245/60R15's on 15x8's and 215/70R15's on 15x7 Magnum's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
There's nothing like the sound of a pushrod V8 singing at the top of her lung's.
Re: 62 Custom Steering Column Flange
1962 Mercury Comet 2.8L 170 cu.in. 2dr manual transmission
- Attachments
-
- 1C9B6A3A-6AF6-49FA-9CD7-1B7EFA70799C_1.jpg (46.56 KiB) Viewed 4527 times
Re: 62 Custom Steering Column Flange
Looks like a nice one.
See Ya,
Mike
See Ya,
Mike