COMET CENTRAL

light looks great now! here is a link to an article by Dick Harrington about the f-150 2 speed w/delay upgrade in case you get tired of the slow one speed factory wiper motor; https://online.fliphtml5.com/wtdj/qtqr/#p=1 also during this thread...; https://www.cometcentral.com/forum/viewtopic.php?p=1...

they are one speed wipers. if yours will go left too it probably has the little delay knob like mine had. it was intermittent wipers, they didnt last long, poor design. so when they fail you have same speed both ways. when they did work properly to the left was a delay of the same one speed. some of...

Welcome to comet central! all depends on what you want from the car . if just to cruise around the 6 will be the easiest. it's always easier to put them back like they were. problems dont snowball like when you make major changes. Lots of guys switch to V8s,so if you stay with the 6 you might find a...

All looks great! Nice stance!

If I let any of my 3 sbf motors sit for a couple months or more I pump it once to set choke & fast idle & turn it over ...usually takes a couple sessions of about 10-15 seconds of turning over until it hits,then one more pump & it'll bust right off. If I drive it every 2-3 days it'll bust just about...

Looks good! hey on the slots ,could be drains ? good that you left them open if for no other reason.

AfxJim where the axle /leafspring ubolts should be,what ever it is,,This is the thing I've never seen. maybe a lowering kit? any idea what it is?

IrishTap wrote: ↑

Sat Mar 02, 2024 3:34 pm

when i turn my key into run it trys to start on its own without being in the car lol

thanks in advance

that could be the 2 small push on wires on the solenoid swapped.

I hope you dont mind I edited in a link to your introduction thread above on your first post of this thread so it will be right at the front & easy to find later on for you & others.

Looks good, is the defrost vent/speaker grille going to be solid white? No I took it down to bare metal and then clear coated the bare metal. I was going for just a clean metal look for that speaker grill. are you going to have the flames out on the cowl,,,as if coming out of the back of the hood t...

I bet the dash sounds a lot better than it looks. what color is the dash butterscotch? :x But I dont think I've never seen the way the rearend is mounted before, the link mounts welded to the housing would have to go if I had it. maybe panhard bars. not sure what the black thing is mounted to the r...

if you mean the support from dash to firewall that the pedals hang from, I dont think they are same,mustang has a different firewall. one of the mustang pedals arms ,cant remember which one but the arm is shaped different but will fit. I had a partscar that someone had put what looked like mustang p...

1964 Comet AM radios are unique. Dont feel lonely, 65's are a one year/one model only radio too. one other thought came to mind that I forgot to mention. when I stripped my car down I remember it have some other pieces of insulation on the bottom of the dash. I cant remember what held it up. it tor...

I bet the dash sounds a lot better than it looks. what color is the dash butterscotch? :x But I dont think I've never seen the way the rearend is mounted before, the link mounts welded to the housing would have to go if I had it. maybe panhard bars. not sure what the black thing is mounted to the ri...

saSSoman8810 wrote: ↑

Fri Feb 23, 2024 7:54 am

My 65 speaker is still in the dash. I am getting ready to remove everything from under the dash . Do you need the speaker or brackets or AM radio.

Take pics of under there to show us if you dont mind.especially any rubber bummers. I remember some on the feet of the cover but may be more?