COMET CENTRAL

[URL=http://s1271.photobucket.com/user/wgreggking/media/20150923_110615_zpsixor4fne.jpg.html][img]http://i1271.photobucket.com/albums/jj632/wgreggking/20150923_110615_zpsixor4fne.jpg[/img] [/url] Looks like somehow the tailpanel trim & lights survived ! any damage to them?? probably the hardest to ...

slightly tweaked on top left(worst) and right, but the gas tank lip to the back tail panel is straight.no wrinkles on sides.I have a parts car, 64 4 door if needed .trunk is the same I think. I had some rust in the quarters down low from bad trunk seal. some bondo, Maybe I can get a partial quarter ...

Thanks for the support, I guess I'll have to drive that 96 GT convertible this winter, that shares the garage. GK

started it up in the garage, got in front to pop hood, somehow wasnt in park? ran in reverse on high idle, with me trying to jump in the window, almost got in the window, but got out just before i got my arm slightly smashed by the side of the garage. We will see how JC taylor ins is to work with.At...

Certain it is coming from the pan. when I remove bolts, it drips out the bolt holes, so it is getting past the gasket somehow and running around. Wipe it clean, and it comes back. The bolts all have washer heads, so maybe a slightly larger flat washer. I'd buy a new aluminum pan if they weren't $10...

Thank PBjo, i did the countersink like in the link. Too fricken hot to lay under the comet, didn't feel like busting those old frame bolts off today. GK

Just installed my new C4 /AOD cross member and tranny mount fits good. Going to replace the motor mounts while on the stands, with the drilled and pinned 2220 & 2221 as well . Do I need to remove the cast piece, or can I just jack up the motor and remove the middle bracket and mount? looks like abou...

This web page has some good scenarios,at the bottom of the page. http://www.secondchancegarage.com/public/186.cfm I was looking at your build page but its quite long, Your engine doesn't have large cam overlap, as scenario #3. I suspect scenario # 5, sticking valves. Im no expert, just an armchair o...

I you cant find anyone here ( plenty great folks here! ) there is the southern gassers who include members in GA.http://southerngassers.org/index.html

Change to 65 parts. the length difference of the inner and outer tie rod asssy, as compared to the lower A arm is what causes bump steer. I went from 64 PS to 65 manual this way , kept the 16:1 box, just add more caster. http://www.cometeastcarclub.org/PDFs/St ... pgrade.pdf

Really enjoyed that thanks. GK

There's a variable switch http://stang-aholics.com/ShowItem/10603 ... ed%29.aspx and an article about the above swap.http://www.cometeastcarclub.org/PDFs/IN ... WIPERS.pdf I take the seat out when I go under the dash GK

Replica Chicago area stock car dirt track models. Saw these as I grew up there. Enjoyhttp://www.kalracing.com/autoracing/don_rich_models.htm

thanks! take your time. GK

Anyone notice this ? 100 pages of crap in the lounge!