All the stuff under the car, Transmission, Brakes, Suspension & Steering
dts
Posts: 7 Joined: Mon Sep 19, 2005 9:00 am
Location: Calgary, AB. Canada
Post
by dts » Sat Jan 07, 2006 4:16 pm
I looked around for 13 inch mags when I did my ranchero, but ended up with spinners instead, but I want mags on my comet! Does anyone know of someone who makes a 13 inch mag for these cars? Or is there a 14 inch wheel that will fit the bolt pattern.
Building my 62 Comet S22
lavron
Site Admin
Posts: 4710 Joined: Sat Nov 01, 2003 9:17 am
Location: Missouri, Ozarks
Contact:
Post
by lavron » Sat Jan 07, 2006 4:37 pm
Is it a 4 or 5 bolt wheel?
See Ya,
Mike
dts
Posts: 7 Joined: Mon Sep 19, 2005 9:00 am
Location: Calgary, AB. Canada
Post
by dts » Sun Jan 08, 2006 8:18 pm
Hey Mike
It's a 4 bolt wheel. If it's the same as my Ranchero it's 4 x 4 1/2 if I remember it right.
Thanks,
Don
Building my 62 Comet S22
cyclone67
Moderator
Posts: 112 Joined: Mon Nov 10, 2003 8:39 pm
Location: medicine hat alberta canada
Post
by cyclone67 » Tue Jan 10, 2006 12:29 am
E.T. rtterns well as american racing makes mags to fit that pa aand craga
Wade ``MERC MAN`` Robertson
cyclone67
Moderator
Posts: 112 Joined: Mon Nov 10, 2003 8:39 pm
Location: medicine hat alberta canada
Post
by cyclone67 » Tue Jan 10, 2006 12:30 am
bad computer!!!!!!! e.t rims as well as cragar and american racing all make rims for thyat application
Wade ``MERC MAN`` Robertson
rbohm
Posts: 24 Joined: Fri Dec 16, 2005 9:08 am
Contact:
Post
by rbohm » Tue Jan 10, 2006 7:40 pm
about the best i can do is offer a set, eventually, of 13" steel wheels with tires. it will likely be next winter though before i can let them go.
64 falcon
66 falcon
66 mustang
a man's fate is a man's fate
and life is but an illusion
lavron
Site Admin
Posts: 4710 Joined: Sat Nov 01, 2003 9:17 am
Location: Missouri, Ozarks
Contact:
Post
by lavron » Sun Jan 15, 2006 12:32 am
14" off of any of the mid to later 6 comets and mustangs should work and shouldn't be that difficult to come up with.
See Ya,
Mike