65 Comet parts needed East TN -

If you need something, post it here
Post Reply
bigdan
Posts: 599
Joined: Thu Jan 31, 2013 5:47 am
Location: Eastern TN

65 Comet parts needed East TN -

Post by bigdan »

All - I'm on the hunt for 65 parts (65 Cyclone) and figured I'd put a list on here in hopes someone has extras or could help. Shoot me a message if you can help. Parts don't have to be perfect, driver quality is fine. Thanks!

Need:
1. Hood stainless trim (including the short pieces at the headlights
2. Trunk C O M E T letters
3. Taillight housings
4. E-brake handle/ assembly
5. Gas door
6. Trim pieces between trunk lid and back glass
7. Drip rail stainless trim
8. Wheel lip and rocker stainless (not a priority, but would be interested)
9. And the white whale - Cyclone tail panel emblem

Thanks again - Dan
Long time search complete, 65 Cyclone project in progress!

Image

saSSoman8810
Posts: 59
Joined: Wed Dec 27, 2023 10:31 am

Re: 65 Comet parts needed East TN -

Post by saSSoman8810 »

Dan, this is Mike . the guy you got the bumpers from. Come on over one of these days and we can go through the upstairs and you can see if there is anything you can use. I know I have the trunk letters and at least 3 good wheel arch mouldings.Plus the car had a load of extra parts inside when I got it. I will pull the deck lid letters as I am going to weld up the holes.

bigdan
Posts: 599
Joined: Thu Jan 31, 2013 5:47 am
Location: Eastern TN

Re: 65 Comet parts needed East TN -

Post by bigdan »

I'll do it. Thanks!

Dan
Long time search complete, 65 Cyclone project in progress!

Image

User avatar
poboyjo65
Moderator
Posts: 7187
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: 65 Comet parts needed East TN -

Post by poboyjo65 »

Dan keep in mind caliente wheel well trim is a tad shorter than cyclones because of the different lower rocker trim. I thought I saw a few tailights on a table in your pics?
Image
Johno

bigdan
Posts: 599
Joined: Thu Jan 31, 2013 5:47 am
Location: Eastern TN

Re: 65 Comet parts needed East TN -

Post by bigdan »

poboyjo65 wrote:
Sat Feb 17, 2024 10:06 pm
Dan keep in mind caliente wheel well trim is a tad shorter than cyclones because of the different lower rocker trim. I thought I saw a few tailights on a table in your pics?
Poboy -

Yes, I have taillights, but they're SUPER rough. If need be I'll try to make them work, but I'm hoping a decent (not pitted, cracked or bent) set turns up.

Not sure on the wheel lip trim. I don't have the rocker trim either, so I'm not sure how hard I'll dig for those.

Dan
Long time search complete, 65 Cyclone project in progress!

Image

Post Reply