Floormats

If you need something, post it here
JimsHot66
Posts: 178
Joined: Fri Oct 22, 2021 6:48 pm
Location: Auburn, CA.

Floormats

Post by JimsHot66 »

You know things are going well when you are thinking of floor mats... Any recommendations on where to get floor mats for a 1966 Comet? Mine has rubber Falcon ones in it now. Thought I would get opinions here before I pulled the trigger on these. https://www.factoryinteriors.com/wn-pro ... op-280796/
Thanks,
Jim
Image

User avatar
Joe Travers
Posts: 2635
Joined: Mon Sep 21, 2020 6:23 pm
Location: Louisiana

Re: Floormats

Post by Joe Travers »

Reckon it depends on your use and conditions. I have some bare earth around the carport & tend to track a little into the car.

Bought some heavy rubber ones that are dished like WeatherTech mats (have those in my Lincoln). A little soapy water and they look like new after you shake them out. Also catches anything that blows through the ventilation system onto the floor. Carpet stays nice & clean.

Joe
Image

1963 1/2 Custom Hardtop
342 stroker, solid roller, T-10, 3.55 posi

JimsHot66
Posts: 178
Joined: Fri Oct 22, 2021 6:48 pm
Location: Auburn, CA.

Re: Floormats

Post by JimsHot66 »

Joe Travers wrote:
Thu Aug 18, 2022 1:50 pm
Reckon it depends on your use and conditions. I have some bare earth around the carport & tend to track a little into the car.

Joe
This Princess of a car only touches pavement. :D I'm looking at carpet since I think it'll look nicer, especially with "Comet" in red stitching on black carpet.

Thanks,
Jim
Image

User avatar
poboyjo65
Moderator
Posts: 7196
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: Floormats

Post by poboyjo65 »

Got a set like em,they were in the car when I bought it,kinda fading a little. Got the earth too Joe! only not bare you can tell by all the grass & rock in the floor board. :roll:
Image
Image
Johno

comethead
Posts: 5735
Joined: Sun Nov 09, 2003 7:44 pm
Location: Palmdale, CA

Re: Floormats

Post by comethead »

Rock Auto has ACC floor mats for a little cheaper https://www.rockauto.com/en/catalog/mer ... or+mat,741

I got a set for a Falcon I sold and they were very nice.

Joe
1965 Caliente HT- 289/4 speed
1964 Falcon HT- track car- 302/4 speed
Image

Caveman49
Posts: 542
Joined: Mon Aug 17, 2015 12:15 am
Location: South Alabama

Re: Floormats

Post by Caveman49 »

Them look good Jim, doesn’t seem like a bad price. I’m thinking of getting a set for my daughter’s 66, dark blue with white lettering.

Looks like AutoKrafters sells them as well, a bit more for cost I believe.
Image
Motor Safe,
Lee

JimsHot66
Posts: 178
Joined: Fri Oct 22, 2021 6:48 pm
Location: Auburn, CA.

Re: Floormats

Post by JimsHot66 »

Looks like Johno has exactly what I'm looking at. Seems there are only two manufacturers in the US, with ACC being the only one doing Comet logo's. What's really motivating me here is that my gas pedal got hung up on the Falcon floor mat the other night. No drama, but made me realize I should have properly fitting floor mats. And they'll look a lot nicer.

Thanks for all the responses!
Jim
Image

User avatar
Joe Travers
Posts: 2635
Joined: Mon Sep 21, 2020 6:23 pm
Location: Louisiana

Re: Floormats

Post by Joe Travers »

poboyjo65 wrote:
Thu Aug 18, 2022 11:59 pm
Image
Dude, you need to teach me that trick.........

Shifting & eating peanuts @ the same time :lol:

Joe
Image

1963 1/2 Custom Hardtop
342 stroker, solid roller, T-10, 3.55 posi

User avatar
SASSY
Moderator
Posts: 5272
Joined: Sat Jan 07, 2006 12:32 am
Location: Wynndel, BC CANADA

Re: Floormats

Post by SASSY »

Doesn't he have the neatest cup holders!
Idea worth "borrowing" I'd say,,,
I'd rather do it myself if it's done right or not,,,isn't that what hotrodding is all about
Image

JimsHot66
Posts: 178
Joined: Fri Oct 22, 2021 6:48 pm
Location: Auburn, CA.

Re: Floormats

Post by JimsHot66 »

SASSY wrote:
Fri Aug 19, 2022 4:25 pm
Doesn't he have the neatest cup holders!
Idea worth "borrowing" I'd say,,,
I definitely miss cup holders in this car! I've got the full console, so no good place to put one.
Image

User avatar
Joe Travers
Posts: 2635
Joined: Mon Sep 21, 2020 6:23 pm
Location: Louisiana

Re: Floormats

Post by Joe Travers »

SASSY wrote:
Fri Aug 19, 2022 4:25 pm
Doesn't he have the neatest cup holders!
Idea worth "borrowing" I'd say,,,
If you have room, heck yeah. :D

Joe
Image

1963 1/2 Custom Hardtop
342 stroker, solid roller, T-10, 3.55 posi

A/FX
Comet Central Member
Posts: 1188
Joined: Tue Jan 06, 2004 8:07 pm
Location: S.E. Wisconsin

Re: Floormats

Post by A/FX »

I don’t have cup holders but I do have floor mats. When I had the carpet installed I asked my upholstery guy make up some floor mats that would fit my modified floor. They have a rubber product on the bottom so they do not move around once they are installed. The heel pad and toe pad on the trans tunnel were made with leftover leather from the steering wheel and dash pad.
Jim
Image
‘64 Cyclone/ Boss 302,quads,4spd, Winters 9”

Image

JimsHot66
Posts: 178
Joined: Fri Oct 22, 2021 6:48 pm
Location: Auburn, CA.

Re: Floormats

Post by JimsHot66 »

Floor mats came today. I really like them! Fit is perfect, quality is good. Selected the 1969-77 Comet logo since it matches Caliente script on the car. These are manufactured by Auto Custom Carpet. Ordered them through Summit since I wanted some other items and this got me free shipping.

Image

Image
Image

Caveman49
Posts: 542
Joined: Mon Aug 17, 2015 12:15 am
Location: South Alabama

Re: Floormats

Post by Caveman49 »

They look good, the red script sets them off nice.
Image
Motor Safe,
Lee

User avatar
Marty
Posts: 31
Joined: Sat Dec 31, 2022 7:05 pm
Location: Tennessee

Re: Floormats

Post by Marty »

Man, you guys got some great looking interiors....
Marty, 1963 Comet Custom
Semper Fi

Post Reply