Vinyl roof trim needed 64-65
-
CosmicComets
- Posts: 355
- Joined: Tue May 29, 2012 11:30 am
- Location: Hibbing, Minnesota
Vinyl roof trim needed 64-65
I have been so far unsuccessful in locating a set of decent vinyl roof trim pieces for a 64 or 65 2 door hardtop, anybody have a set not being used? I have seen discussions on here as far a part numbers, interchangeability etc. I believe 1964 or 1965 will work, either Falcon or Comet, two-tone with painted roof, or vinyl roof cars. Thanks, Cary
65 Cyclone 460W, C4, trans brake, CalTracs
64 Cyclone (son's) 408W 8 stack EFI 6speed, Winters qc rear
64 Cyclone (son's)347, 4speed, mini tubbed 9"
1965 Caliente, 289, 4 speed, buckets, 51k miles
1969 428 CJ coupe (son's)
1965 Cyclone, tube chassis, 514bbf, glide w/brake
WARNING: all of my vehicles are armed with anti-thrift devices
64 Cyclone (son's) 408W 8 stack EFI 6speed, Winters qc rear
64 Cyclone (son's)347, 4speed, mini tubbed 9"
1965 Caliente, 289, 4 speed, buckets, 51k miles
1969 428 CJ coupe (son's)
1965 Cyclone, tube chassis, 514bbf, glide w/brake
WARNING: all of my vehicles are armed with anti-thrift devices
Re: Vinyl roof trim needed 64-65
This was posted on my behalf...so...BUMP
Peps
Peps
64 Cyclone...347 w/ 4-speed, Cal-tracs, Currie 9" rear-end, more goodies to follow
-
barrys65cyclone
- Posts: 606
- Joined: Mon Aug 27, 2007 2:54 pm
- Location: maryland
Re: Vinyl roof trim needed 64-65
That's Going to be a tough item to find.
Re: Vinyl roof trim needed 64-65
you want 64 or 65. they are different. should of bought mine the first time round...
Re: Vinyl roof trim needed 64-65
I was looking for a 64. I did not know they were different, but thanks for the info. I'm not sure I knew you had a set for sale. Must have missed it. My search continues. If I can't find them, it's not the end of the world. My car didn't originally have them. I was just hoping to put a vinyl top on it. Thanks.
Peps
Peps
64 Cyclone...347 w/ 4-speed, Cal-tracs, Currie 9" rear-end, more goodies to follow
-
philthyphil
- Posts: 3
- Joined: Wed Feb 12, 2020 11:30 am
Re: Vinyl roof trim needed 64-65
bump again.....anyone find any?,or something that works?
-
CosmicComets
- Posts: 355
- Joined: Tue May 29, 2012 11:30 am
- Location: Hibbing, Minnesota
Re: Vinyl roof trim needed 64-65
Phil, Peps found a real nice set on Ebay a while back, I haven't seen any on there lately. I believe either 64 or 65 will work, but you would need the matching drip rail for whichever you use. On a 65 the vinyl trim replaces the pillar spear, and not all 64's had those. Good luck, lots of eyes and ears on this sight!bump again.....anyone find any?,or something that works?
Take care, Cary
65 Cyclone 460W, C4, trans brake, CalTracs
64 Cyclone (son's) 408W 8 stack EFI 6speed, Winters qc rear
64 Cyclone (son's)347, 4speed, mini tubbed 9"
1965 Caliente, 289, 4 speed, buckets, 51k miles
1969 428 CJ coupe (son's)
1965 Cyclone, tube chassis, 514bbf, glide w/brake
WARNING: all of my vehicles are armed with anti-thrift devices
64 Cyclone (son's) 408W 8 stack EFI 6speed, Winters qc rear
64 Cyclone (son's)347, 4speed, mini tubbed 9"
1965 Caliente, 289, 4 speed, buckets, 51k miles
1969 428 CJ coupe (son's)
1965 Cyclone, tube chassis, 514bbf, glide w/brake
WARNING: all of my vehicles are armed with anti-thrift devices