Pump to Edelbrock Carb Fuel Delivery Question

289 - 351 cid Small Block Performance
Post Reply
User avatar
masonjarz
Posts: 49
Joined: Sat Aug 25, 2018 4:03 pm

Pump to Edelbrock Carb Fuel Delivery Question

Post by masonjarz »

Hi,
I'm going back to a mechanical fuel pump on my '67 Caliente which has a 351 Windsor and an Edelbrock carb (fuel inlet on passenger side). I would like to avoid rubber fuel line if I can but I'm having trouble finding a pre-made steel line or braided hose which will work for me. I would prefer not to bend a custom line.
I'd appreciate any suggestions. Thanks, Ed

barrys65cyclone
Posts: 606
Joined: Mon Aug 27, 2007 2:54 pm
Location: maryland

Re: Pump to Edelbrock Carb Fuel Delivery Question

Post by barrys65cyclone »

only option make a template send to classic tube and have one made.

User avatar
poboyjo65
Moderator
Posts: 7037
Joined: Thu Oct 20, 2011 9:40 pm
Location: Camden, Tenn.

Re: Pump to Edelbrock Carb Fuel Delivery Question

Post by poboyjo65 »

Most ,if not all edelbrock carbs have an inlet on the driver side also. just thought I'd mention it in case you find one that is a little short. & they make a chrome hard line with a banjo fitting, long enough to get out in front of the carb away from the throttle linkages, where you could then add a braided hose or what ever.
Image
Johno

User avatar
masonjarz
Posts: 49
Joined: Sat Aug 25, 2018 4:03 pm

Re: Pump to Edelbrock Carb Fuel Delivery Question

Post by masonjarz »

Thanks Barry and Jo

Post Reply