Comet hood logo
-
- Posts: 40
- Joined: Mon May 04, 2020 9:17 am
- Location: Oshkosh, WI
Comet hood logo
The “Comet” logo came off of the hood lip on my 65. It has several pins on the back. Is there some kind of clip/keeper on the backside to keep it in place? If so, can anyone tell me where I can get some? Or, is there some other way to keep it on? Inquiring minds want to know.
Jack Bartelt
1965 Comet Caliente Convertible
1965 Comet Caliente Convertible
Re: Comet hood logo
These emblem retainers https://www.kentuckymustang.com/barrel- ... gJo5_D_BwE get pushed into the drilled emblem holes. Once all the holes have retainers in place you’ll press the emblem into its position.
Not sure if the ones I posted above are the right size. You’ll have to measure the pins to order the right ones.
Found a vid that might help https://youtu.be/-_hU56BEO8c
Joe
Not sure if the ones I posted above are the right size. You’ll have to measure the pins to order the right ones.
Found a vid that might help https://youtu.be/-_hU56BEO8c
Joe
-
- Posts: 40
- Joined: Mon May 04, 2020 9:17 am
- Location: Oshkosh, WI
Re: Comet hood logo
Joe,
Thanks for your direction. Barrel nuts have been ordered.
The people on this forum are extremely knowledgeable and helpful. I think you guys rock!
Peace/Love,
Jack
Thanks for your direction. Barrel nuts have been ordered.
The people on this forum are extremely knowledgeable and helpful. I think you guys rock!
Peace/Love,
Jack
Jack Bartelt
1965 Comet Caliente Convertible
1965 Comet Caliente Convertible
Re: Comet hood logo
Glad to help out Jack!