64..changing over to dual master cylinder
-
- Posts: 47
- Joined: Tue Nov 29, 2022 9:48 am
64..changing over to dual master cylinder
I am old Mopar guy and this is common here. Is this change usually on he list for pre 67 Ford???? Best company for pre bent lines and distribution block???
- Boss/Cyclone
- Site Admin
- Posts: 2740
- Joined: Thu Oct 19, 2006 9:55 pm
- Location: South Central Michigan (Near Michigan International Speedway)
Re: 64..changing over to dual master cylinder
I changed my 65 Cyclone and 66 Mustang to a dual master cylinder. I believe I used a 67 Mustang master on my Mustang and a 70's maverick master on my Cyclone, but its been so long I am not sure any more. I bent and flared my own lines using the nickel copper lines and an aftermarket proportioning valve.
1965 Mercury Cyclone former drag car, 1971 Boss 351 engine, 4 speed, ladder bars, etc. Now returned to a street car.
Larry
Larry
-
- Posts: 47
- Joined: Tue Nov 29, 2022 9:48 am
Re: 64..changing over to dual master cylinder
I hate bending lines even the soft ones! I assume the dual MC will bolt right up to firewall plate?