Another Aussie 64 Comet Build
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Been a little while since I posted but things are moving along. Steering Rack Mounted
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Power steering reservoir and hard lines
- Attachments
-
- 6BF62EE8-20FA-4C81-8005-E0F12F8A41C0.jpeg (52.28 KiB) Viewed 2726 times
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Custom fuel tank
Re: Another Aussie 64 Comet Build
you do such top notch work,,your attention to detail puts your work over the top....very nice...take care,john....pop
pop/glenda
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Chassis Connectors, Fuel Hard Lines, Trans Cooler mounted and plumbed.
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Trunk floor was modified to make way for the upper shock mounts.
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
Diff housing mocked up in place
-
- Posts: 35
- Joined: Mon Nov 02, 2015 9:40 am
- Location: Australia
Re: Another Aussie 64 Comet Build
6mm Bizalloy plate was lazer cut using mdf templates. This was used to plate up the chassis rails and for the upper arms to mount to. The lower arms were sunk into the chassis rails.
- Joe Travers
- Posts: 2460
- Joined: Mon Sep 21, 2020 6:23 pm
- Location: Louisiana
Re: Another Aussie 64 Comet Build
Great fab work!!!
You the MAN!
JT
You the MAN!
JT
Re: Another Aussie 64 Comet Build
Beautiful craftsmanship!
What is the vacuum diaphragm and cylinder in the trunk for?
Fred
What is the vacuum diaphragm and cylinder in the trunk for?
Fred
Re: Another Aussie 64 Comet Build
Wow! you aussies do top notch work,are you aussiejohn's kin? !
are the tires on the right sides? looks like rotation is wrong ? Of course I do realize this is mock up stage & they're coming back off but i had to speak up.
are the tires on the right sides? looks like rotation is wrong ? Of course I do realize this is mock up stage & they're coming back off but i had to speak up.
Re: Another Aussie 64 Comet Build
I appreciate the design, fabrication, and welding, very well done. Please keep the updates (and photos) coming.
Jim
Jim