64 Cyclone Spindle needed

If you need something, post it here
Post Reply
User avatar
rj4004
Posts: 8
Joined: Tue Mar 15, 2022 7:59 pm

64 Cyclone Spindle needed

Post by rj4004 »

Looking for 1964 Comet Cyclone Right Side Spindle V8 application

Thanks RJ
Image
Top
A/FX
Comet Central Member
Posts: 1188
Joined: Tue Jan 06, 2004 8:07 pm
Location: S.E. Wisconsin

Re: 64 Cyclone Spindle needed

Post by A/FX »

rj4004 wrote: ↑
Thu Mar 17, 2022 5:02 pm
 Looking for 1964 Comet Cyclone Right Side Spindle V8 application

Thanks RJ
There is nothing special about a Cyclone spindle compared to any Comet/ Falcon V8 spindle. I believe ‘63 & 64 are the same and ‘65 may also work.
Early Mustang may also fit.
Jim
‘64 Cyclone/ Boss 302,quads,4spd, Winters 9”

Image
Top
User avatar
Joe Travers
Posts: 2635
Joined: Mon Sep 21, 2020 6:23 pm
Location: Louisiana

Re: 64 Cyclone Spindle needed

Post by Joe Travers »

https://www.falconparts.com/ford-falcon ... 7p7255.htm

Joe
Image

1963 1/2 Custom Hardtop
342 stroker, solid roller, T-10, 3.55 posi
Top
User avatar
SASSY
Moderator
Posts: 5272
Joined: Sat Jan 07, 2006 12:32 am
Location: Wynndel, BC CANADA

Re: 64 Cyclone Spindle needed

Post by SASSY »

There has been extensive discussion on spindles on the forum here and the conclusion is that 63-4 V8 are the same and 65 is same as 65-6 Mustang. So any C3 V8 spindle will work on your 64 Cyclone.
I have pair but im in Canada
I'd rather do it myself if it's done right or not,,,isn't that what hotrodding is all about
Image
Top
Post Reply

Return to “Wanted”